Dinosaurs

He's your favorite dinosaur and he comes in 3 different sizes. It's Flexi Rex! This T-Rex comes in 7 different colors and is an awesome fidget toy or desk buddy. The large Rex stands at approximately 3 inches tall and 6 inches long. The medium Rex stands at approximately 2.5 inches tall and 5 inches long and the small Rex stands at approximately 2 inches tall and 4 inches long. Choose your favorite and start your adventure today! Our 3D printed items are made with biodegradable filament but Rex doesn't like hot temperatures so take care not to leave him in a hot car out in the sun or he might start to melt. Also, 3D prints sometimes have small defects which are natural during the printing process. Each piece is inspected for quality and functionality before selling.

Read more less

Introducing our adorable 3D printed T-Rex Easter Bunnies! These charming little dinosaurs bring a playful twist to your Easter celebrations. Standing at approximately 3 inches tall and measuring 4 inches in length, each T-Rex is meticulously crafted with flexible material, making them both durable and fun to play with. But here's the real surprise - each T-Rex comes with an Easter egg nestled snugly in its grasp! Whether you're hiding treats for an Easter egg hunt or simply adding a festive touch to your décor, these delightful dinos are sure to delight kids and adults alike. And let's not forget the finishing touch - adorable bunny ears adorning each T-Rex, adding an extra dose of cuteness to these already lovable creatures. Available in four vibrant colors - Ice Blue, Green, Purple, and Orange - there's a T-Rex to suit every Easter theme. Make this Easter egg-stra special with our 3D printed T-Rex Easter Bunnies - the perfect combination of fun, whimsy, and festive charm! **Our 3D printed items are made with biodegradable filament but Rex doesn't like hot temperatures so take care not to leave him in a hot car out in the sun or he might start to melt. Also, 3D prints sometimes have small defects which are natural during the printing process. Each piece is inspected for quality and functionality before selling.

Read more less

He's your favorite dinosaur and he's ready to come with you wherever you may go. It's Flexi Rex as a keychain! This T-Rex comes in 7 different colors and is the smallest version of the flexi rex fidget toys. Choose your favorite and start your adventure today! Our 3D printed items are made with biodegradable filament but Rex doesn't like hot temperatures so take care not to leave him in a hot car out in the sun or he might start to melt. Also, 3D prints sometimes have small defects which are natural during the printing process. Each piece is inspected for quality and functionality before selling.

Read more less

These charming little dinosaurs are here to add a sweet and playful touch to your space. Standing at approximately 3 inches tall and measuring 4 inches in length, each dino is carefully crafted with durable, flexible material, making them a delightful keepsake or gift for any occasion. The highlight? Each T-Rex lovingly holds a heart in its arms, spreading joy and affection wherever it goes! Whether you’re looking for a unique Valentine’s Day gift, a cheerful desk companion, or a token of appreciation, these dinos are sure to make hearts melt. Available in four vibrant colors—red, pink, blue, and purple—there’s a Heart-Hugging Rex to match every mood and style. Their cute, compact size makes them perfect for decorating shelves, desks, or anywhere you need a pop of charm. Make someone’s day extra special (or treat yourself!) with our 3D-printed Heart-Hugging Rex—the perfect combination of fun, love, and creativity! Crafted with biodegradable filament, these dinos are eco-friendly but don’t like the heat! Be sure to keep them away from hot cars or direct sunlight to maintain their adorable shape. Please note that 3D printing may produce small natural imperfections, but each dino is thoroughly inspected for quality and durability before being sent to its new home.

Read more less

Get ready to rule your prehistoric kingdom with this 3D-printed Tyrannosaurus Rex! Fully articulated and brimming with attitude, this dino is perfect for epic battles, bold displays, or just chilling like the king it is. 📏 Size: Approx. 5.5" tall × 6.5" long🦴 Features:• Flexes at the head, arms, legs, and tail• Mouth opens wide for dramatic imaginary roars• Dynamic posing for collectors and kids alike Each T-Rex is 3D printed with care and inspected for quality. Designed by STLFLX and authorized to sell finished prints. Avoid leaving in hot environments to keep your dino looking sharp.

Read more less

Get ready to "hatch" some fun with our Plush Dino Eggs! These prehistoric cuties come in two sizes: Large at roughly 6.5 inches tall and 5 inches wide, and Small at roughly 4 inches tall and 3 inches wide. Made from super-soft minky fabric and filled with fluffy polyfill, these eggs are just as snuggly as they are adorable. Each egg is embroidered to look like it’s cracking open, revealing a cheeky dinosaur with a bright green eye peeking through! Choose from two color combos: Gray egg with a Tan dino or Tan egg with a Gray dino. The small dino eggs even come with a paracord loop, making them perfect for hanging on backpacks or keychains! These hatching dino eggs are ready to bring prehistoric charm to your collection! Perfect for dino lovers and adventure seekers of all ages! *Spot clean with cold water. If needed, put on gentle cycle in washer with mild detergent and cold water. Allow to air dry as heat could affect the softness of the fabric

Read more less

Graceful, gentle, and fully articulated, the Adult and Baby Brachiosaurus bring a whole new level of charm to your prehistoric lineup. Whether they’re reaching high or grazing low, these long-necked lovelies are a showstopper duo. 📏 Sizes:• Adult: Approx. 7.25" tall × 7" long• Baby: Approx. 5" tall × 5" long 🦴 Features:• Poseable head, neck, legs, body, and tail• Necks tilt downward for realistic grazing action• Perfect for storytelling scenes or a dynamic display Authorized STLFLX design, 3D printed with care. Slight quirks may happen with handmade items. Store in a cool spot to preserve shape.

Read more less

Make room for a fan favorite! With its signature curved crest and smooth articulation, the Parasaurolophus is a must-have for any collection. Whether grazing or on the move, it’s always picture-perfect. 📏 Size: Approx. 6" tall × 5" long🦴 Features:• Flexible head, arms, legs, and tail• Elegant design with smooth, satisfying motion• Ideal for collectors, kids, or gentle giant lovers Made with love and licensed by STLFLX. Some slight imperfections from printing may occur. Avoid prolonged heat exposure.

Read more less

Bring home a Jurassic icon with this bold and bendable Stegosaurus! Known for its distinctive plated back, this dino is ready to march through your collection with style and strength. 📏 Size: Approx. 4" tall × 6.75" long🦴 Features:• Flexible at the head, legs, body, and tail• Striking detail—perfect for display or imaginative play Licensed from STLFLX and lovingly 3D printed. Minor print marks may be present. Keep away from heat to avoid deformation.

Read more less

Double the horns, double the charm! Meet the Adult and Baby Triceratops —perfectly poseable and full of prehistoric personality. Whether you're a collector or gifting to a dino-loving kid, these two are sure to steal hearts. 📏 Sizes:• Adult: Approx. 4" tall × 6.5" long• Baby: Approx. 3.25" tall × 5" long 🦴 Features:• Fully articulated heads, legs, bodies, and tails• Mouths open slightly as heads tilt back—so cute!• Built for bonding scenes or a sweet shelf display Crafted with detail by STLFLX. Slight 3D print quirks may happen, but quality is always top priority. Store safely—heat can warp these cuties.

Read more less

Add some speed and smarts to your dino squad with this agile Velociraptor! With fully movable limbs and a mouth ready to snap, this dino is built for action—whether it’s stalking prey or starring on your shelf. 📏 Size: Approx. 5" tall × 4.25" long🦴 Features:• Fully articulated head, limbs, tail, and jaw• Perfect for stealthy poses and creative play• Smooth, satisfying motion for fidget-friendly fun Designed by STLFLX and 3D printed with love. Slight imperfections may occur. Keep out of direct heat to maintain shape.

Read more less

Unearth the past with this beautifully crafted 3D printed T-Rex fossil, designed to look like a relic embedded in ancient rock. Printed using eco-friendly, biodegradable filaments, this fossil captures the essence of history while being kind to the environment. The fossil's base and stand are made from a sedimentary rock-like filament, providing a naturalistic setting for the exposed bones, which are printed in realistic bone-colored filament. The fossil slab measures approximately 9 inches long, 6.5 inches tall, and 1 inch thick, giving the appearance of a T-Rex skeleton still encased in its rocky resting place. It comes with a 5-inch long, 2.75-inch high, and 3-inch deep stand that complements the fossil's display, ensuring it remains a centerpiece on any shelf or desk. Please handle with care, as the filament is heat-sensitive, and exposure to high temperatures could cause deformation. Perfect for fossil enthusiasts, paleontology fans, or anyone looking for a unique, eco-conscious decor piece, this T-Rex fossil beautifully blends history with sustainability.

Read more less